Take your FREE HSW Course here - AIA approved!

This is your go-to source for free AIA-approved continuing education for architects. Plus, almost all our courses are delivered in streaming HD video. Registration is fast and easy, just click on Login/Register above. Then, you can enroll in any of our courses found in any of our programs with a single click. Our courses meet or exceed NCARB's high standards for state board license renewal. AIA member? Your credit will be reported to AIA for you.

Innovative Solutions for Architectural Challenges

Operable glass walls can provide for flexible interior spaces, safer interior environments, rapid and highly accessible connections to exterior spaces and all the benefits that ensue, such as fresh air, light, unobstructed views and rapid egress in the event of emergency. This course examines how operable glass walls meet those challenges and then shows the application of those principals in several case studies.

...Read More

Introduction to Exterior and Facade Lighting

Program: The Art and Technology of Lighting

This course will explore the use of exterior lighting to illuminate building facades, landscapes, pathways, plazas, and points of interest, like statues. Popular techniques (moonlighting, wall washing, grazing, etc.) will be defined and the performance of various lighting fixtures will be compared to help designers identify the fixtures best-suited for particular applications. Important considerations including: energy codes, dark sky criteria, and occupant safety will be addressed. The renovation of the exterior lighting at the Greater Columbus Convention Center, designed by Ardra Zinkon, will be profiled.

HSW Justification:
Exterior lighting can facilitate the enjoyment of an outdoor space and enhance the feeling of safety and security people experience in these areas, but the design of exterior lighting systems must accomplish more than bathing an area in illumination indiscriminately. Energy codes limit the amount of energy that the lighting system can consume and define lighting controls requirements to minimize energy waste. In addition, the Model Lighting Ordinance (MLO), developed by the International Dark Sky Association (IDA) and the Illuminating Engineering Society (IES), provides guidance on ways to reduce light pollution and glare that can be created by outdoor lighting. This course will provide designers with tips on how to create exterior lighting solutions that satisfy energy codes and dark sky criteria, while providing ample illumination to create beautiful and inviting outdoor spaces.

Learning Objective 1:
Create exterior lighting designs that provide the recommended levels of illumination for highlighting facades, supporting wayfinding, and accenting features of the outdoor space, while satisfying code-mandated energy use and controls requirements as well as dark sky criteria.

...Read More

ISO-1002: Inverters

Inverters are a modern, simple way to achieve an emergency lighting solution while minimizing maintenance costs and utilizing existing architectural fixtures for emergency purposes. This course will give the student the skills they require to design and specify inverter-based emergency lighting systems.

...Read More

Designing for Wellness

This article explores some of the latest products and solutions improving the air quality, thermal comfort, electric light, and daylight control that can be incorporated into a project. Each improves the wellness of the people in the built environment.

HSW Justification:
“Increased evidence shows that indoor environmental conditions substantially influence health and productivity. Building services engineers are interested in improving indoor environments and quantifying the effects. Potential health and productivity benefits are not yet generally considered in conventional economic calculations pertaining to building design and operation. Only initial costs plus energy and maintenance costs are typically considered. A few sample calculations have also shown that many measures to improve indoor air environment are cost-effective when the health and productivity benefits resulting from an improved indoor climate are included in the calculations (Djukanovic et al. 2002, Fisk 2000, Fisk et al. 2003, Hansen 1997, van Kempski 2003, Seppanen and Vuolle 2000, Wargocki, 2003.) This article explores some of the latest products and solutions improving the air quality, thermal comfort, electric light, and daylight control that can be incorporated into a project. Each improves the wellness of the built environment.

Learning Objective 1:
Explain how air circulation improves thermal comfort and alertness.

Learning Objective 2:
Describe the ways that increasing the presence of plants and greenery on a project have been shown to clean the air, reduce urban heat island effect, and positively affect the health and wellbeing of people in the built environment.

Learning Objective 3:
Summarize how circadian LED lighting technology delivers health benefits—improving overall sleep quality, daytime productivity, and feelings of wellbeing—that modern architectural lighting lacks.

Learning Objective 4:
Discuss how using an underfloor air distribution system (UFAD) improves indoor air quality.

Learning Objective 5:
Identify the latest advancements in smart window technology that allows these solutions to control glare and solar heat gains, while maintaining views to the outdoors.

...Read More

Egress Marking and Illumination ISO-0501

This course is designed to introduce the architect to egress marking systems that are used for ordinary way finding and building evacuation in emergency situations. These signage systems are meant to be selected and installed according to specific standards established by building codes. Additionally, once installed, these systems must be tested to assure their efficacy in case of an emergency. How to select and specify the appropriate markers and the technological solutions available, as well as testing methods, will all be covered in this course.

HSW Justification:
Building exit markings are critical to the health, safety, and welfare of building occupants during emergency situations.

Learning Objective 1:
When this course is complete the student will will understand egress signage obligations as imposed through building codes and standards.

Learning Objective 2:
The student will further understand the various technologies available to address those signage codes and standards.

Learning Objective 3:
And, the student will learn what the requirements are to conduct on-going testing of egress systems after installation.

...Read More

Create Safer, Healthier, and Better Sounding Interiors

 

Program: Architecture, Design and Building Science

This course explores a few of the many ways that interiors impact the health and well-being of the people inside them. From restrooms being designed to reduce contact with contaminated surfaces and inhibit the presence of bacteria, to acoustics solutions that absorb or isolate noise, making interiors more comfortable and productive. Biophilic design, a health-focused design concept that encourages the inclusion of plants, daylight, and natural elements like wood and stone, is also discussed, as are the options designers have for bringing stone elements inside.

...Read More

How to Take a Course on The Continuing Architect

This one-minute video shows you just how easy it is to take a course on TCA. Give it a play, explore the intuitive User Interface and the many features that make TCA easy and enjoyable. New courses are being added all the time!

There is never a cost to take a course or earn a certificate. Registration takes just a couple minutes – you only have to do it once to enroll in any course, at any time in the future – look over the course catalog for each of our programs, just click on a couple of course descriptions that look interesting to you to add them to your wish list, and start watching some really great videos.

You will also enjoy browsing the Video Vault, our video library of building and construction videos from many of the manufacturers and organizations that sponsor courses on TCA. Courses are not permitted to feature competitive product distinctions between manufacturers, except in very broad terms, so these additional videos get into branded product details, installation, safety, materials and other details of the brands.

If you have any questions, just use the Contact Us link at the top of the page.

...Read More

Insulated Metal Panels

This course will cover the role of IMPs as an effective building envelope in terms of air and water infiltration and a thermal barrier. Additionally, the course will review how proper insulation is critical to performance, as well the many other attributes provided by IMPs whether employed as new construction or retrofits.

HSW Justification:
This is a re-registration of course number K2009N to run on our platform

Learning Objective 1:
Identify the role of prefabricated insulated metal panels (IMPs) as an all-in-one water and air barrier enclosure with continuous insulation.

Learning Objective 2:
Compare the construction benefits that IMPs deliver via a more simplified, cost-effective, and time-efficient erection process in addition to enhanced safety and less required manpower in the field.

Learning Objective 3:
Describe the key full building enclosure, structural, and fire-performance attributes of IMPs.

Learning Objective 4:
Explore the versatility and performance attributes of IMPs for retrofits and recladding.

NOTE:

A supplemental piece of reading material has been included with this course in order to fulfill the NCARB requirement for course content and duration. You will find some answers to quiz questions in both the video and print portion of the course content.

To begin the course, scroll down and download the red highlighted PDF file.

...Read More

What Every Design Pro Should Know About the Replica Green Wall Trend

Program: Landscape Environmental Design

This course will describe the replica Green Wall Trend, that is the use of biomimicry in artificial plants in interior and exterior green wall systems. The trend toward biomimicry is driven by low cost, low maintenance, very high quality plant substitutes, and no water, light, power or HVAC resource requirements. Yet, Replica installations provide the same aesthetic and evoke the same desirable biophilic responses as live plants.

HSW Justification:
Replica Green Walls have all the biophilic benefits of green walls, such as promoting healing, reducing anxiety, and attenuating noise. Replica green wall spaces are especially conducive to gathering and can foster community, encourage group meeting and communication, and promote human interaction. In addition, they have added sustainability benefits by eliminating regular maintenance, the need for water for irrigation, or the need for electrical energy for light, or the need for electrical and/or natural gas for heating or cooling.

Learning Objective 1:
Students will be able to define a Replica Green Wall and describe its benefits and advantages

Learning Objective 2:
Students will be able to identify and describe the quality indicators in a green wall, including the types of systems available, the types of foliage available, and the areas of research and development underway.

Learning Objective 3:
Students will be able to describe appropriate applications for a replica green wall.

Learning Objective 4:
Students will be able to list in detail the various methods of installation.

Note: The Continuing Architect is permitting the brand name of this product to be mentioned because it was the only product of its type and is patent pending.

...Read More

Composite Panel Products – Division 6 Materials & LEED® Credits

This course will equip participants to compare features, benefits and limitations of particleboard and medium density fiberboard (MDF) with considerations of product grades and their physical properties for proper end-use selection.

Learning Objective 1:
To help students understand the health benefits of composite products and how testing is an essential means to verify performance.

Learning Objective 2:
To explain to attendees the alternative resin technologies used in the manufacturing process.

Learning Objective 3:
To help students to become familiar with various composite panel products and their environmentally-friendly make-up.

Learning Objective 4:
To familiarize attendees with the variety of ways that composite panels contribute to LEED credits.

...Read More
Load More

Your session will expire soon. Click below to stay logged in.

Stay Logged In Logout
×